Professional Roofing Consultants in UK

With 25 years of experience and expert roofing consultants in UK, Thornton Roof Leak Detection helps you meet your roofing problems effectively.

Thornton Roof Leak Detection Flat Roof Leak Detection in UK

Thornton Roof Leak Detection experience in resolving roofing problems made them a pioneer in flat roof leak detection in UK. They are constantly developing innovative procedures to meet new challenges.

Professional Roofing Consultants in UK

With 25 years of experience and expert roofing consultants in UK, Thornton Roof Leak Detection helps you meet your roofing problems effectively.

Thursday 28 September 2017

Few Common Reasons behind Leaky Roofs

For a building or any engineering structure, having a proper roof is very vital. If that roof is not properly constructed or if the roof gets damaged due to some external reasons, it may lead to a leakages, which affects the stability the entire structure, as the leaks usually aggravate as days pass by. Many leak detection specialists in UK help you locate the leaks, so that it can be fixed to avoid further deterioration. Let’s have a look at few reasons of a leaky roof.

1. Deterioration of roof:            

After a period of time, roofs starts displaying wear and tear, as it is exposed to different climatic changes over the years. The huge temperatures the roofs are exposed to, create cracks that leads to leaks.


2. Damaged Underlays:

The underlays that are designed to drain away the water underneath the tiles begins to deteriorate with time which eventually leads to leaky roofs.


3. Shallow roof slopes:

When roof slopes are too shallow, there are possibilities for the wind to lift the shingles and thereby letting rain water enter the area underneath, leading to leakage.


4. Accumulation of rubbish:

When dry leaves, twigs etc. gets accumulated on top of the roof and blocks the path by which the rain water usually drains, they rot and deteriorate the roof, subsequently leads to a leakage.


5. Roof junctures being damaged:

If the roof junctures are damaged during some installations and left unattended after that, it will lead to leakage.


These are few common reasons that cause leakage in roof. There are a number of companies offering services on leakage detection in UK to help people fix the leaky roofs.

Thursday 21 September 2017

Leaky Roof Left Unattended? You Are In Danger.

One of the major issues we face with our buildings over time is the leakage of roofs. Leaky roofs cause major damages, as we usually notice them only days after the leak develop, and by the time the damage would have been already done. There are a lot of leak detection specialists in UK, who are offering services to detect the source of leaks, so that necessary steps can be taken to prevent further damages.

Dangers of having a leaky roof:

1. Deterioration of the roof structure:

When the roof leaks, water starts dripping on to the ceiling underneath. Once the ceiling gets dampened up, it starts to deteriorate and can fall off anytime. Leak detection specialists in UK use the best technology to detect the leaks, so that it can be fixed.

2. Damages to walls and ceiling:

If the leaks go unnoticed, the walls and ceiling will absorb too much of water and bubbles starts to popup, leading further damages to the things that are mounted on it.

3. Risk of fire accidents:

When the leaked water comes in contact with the electrical wirings, it leads to short circuits and can cause fire accidents. If leaked water gets clogged in junction boxes, the people who operate the switches are at the risk of getting electrical shocks.

 4. Health issues:

Due to the moisture accumulated due to leakage, the chance of mold growth in the attic is very high and the people who come in contact with mold will have allergies and other health issues.

So it’s always better to get the services of leak detection specialists in UK, to locate the leaks, so that further damages can be avoided.

Monday 20 March 2017

Water Leak Detection using Infrared Technology – An Overview

Detection of roof leaks has become a lot more easier today, thanks to the development of infrared technology. The method of testing, which harnesses the power of infrared, is called the transient thermography testing. One of the reasons why this method is preferred by leak detection specialists is that it enables them to see building or roof conditions beyond the naked eye.

How does it work?
Infrared technology works on the basis of a simple scientific concept. When molecules vibrate, they generate electromagnetic energy. Such molecules move even faster, emitting more energy during higher temperatures. This energy produced is the infrared radiation that is not visible to our naked eye, but can be viewed with the help of a specialized camera equipped with an infrared sensor.

How Infrared is used in Roof Leak Detection?

Transient thermography testing has to be performed only during ideal conditions. Best results are yielded when the test is conducted on a clear day, and the sun has heated up the roof. Water retains heat longer than solid surfaces, which means that trapped water cools slower than the roofing surface. Now with the infrared photos taken using the specialized camera, the thermal differences between the cool area of the roofing surface and the warm area of the trapped water can be clearly identified.

The Infrared Advantage:

Transient thermography is highly useful for detecting water leaks in areas that are hard to examine. They are also effective in detecting moisture as well.

If you need your room or building to be inspected for leakages, get in touch with a leakage detection service in the UK. Their professionals do employ transient thermography method to detect roof leaks easily.

Tuesday 14 March 2017

Prevent Extensive Roof Damage with Electronic Roof Testing

Roof leaks are definitely devastating. When your roof isn’t well ventilated or has undergone damage, water can seep through the ceiling and lead to costly repairs. Identifying the leakage spot was even more difficult, until the execution of advanced electronic roof testing method. Here’s what you need to know about this flat roof leak detection technique.

Electronic Roof Testing:

Electronic roof testing, also known as spark testing, is one of the popularly used roof leak detection techniques today. This method offers the ability to detect roof leaks faster, with more precision and accuracy. Electronic roof testing uses electricity that identifies the exact source of water ingress. Unlike traditional methods of roof leakage detection, electronic roof testing methods are beneficial in terms of saving time and money that’s rather wasted on call out charges and repair costs.

Benefits of Electronic Roof Testing:

Some of the major benefits of electronic roof testing include:

1.    Accurate and cost effective means of fault diagnosis.

2.    Identifies leakage faster.

3.    Larger roof areas can be tested for leaks quickly.

4.    Roof leaks are detected with accuracy.

5.    This is a non-intrusive form of testing.

Get Help from a Roof Leak Detection Specialist:

Most expert leak detection and investigation specialists utilize this method for roof leak investigation.  With years of experience and knowledge on roofing systems, they can detect where the leak originated from, in buildings and other waterproofing structures.

If you identify any signs of roof leakage and are quite unsure about it, consult a leading leak detection specialist in the UK.

Thursday 9 March 2017

3 Easy Ways to Prevent Roof Leaks

No one would prefer going through the nightmare of roof leaks. This is because they not just cost lot of money but also can adversely damage our property. Roof leaks can be a burden for offices, especially during the rainy days, and it can lead to diseases and illness. Here are some essential tips from leakage detection specialists in the UK, to prevent roof leaks:

Keep Monitoring Possible Leak Spots:

There are several spots in the building that can instigate leakage problems, however keep an eye on the most likely ones. It is hard to find out the actual source of leakage, therefore check for roof leak detection during the snowy weather at the earliest.

See if the Gutters are Properly Installed:

Make sure the gutters are connected to the roof in the right manner and that they are sloped at a suitable angle. Improper installation of gutters has been one of the common reasons for rook leakage in buildings. Apart from placing them at an appropriate angle, ensure that the gutters are properly maintained by cleaning them periodically. This way, dirt and dust won’t get inside to block it.

Hire a Roof Leak Detection Service:

If you identify signs of rook leakage or assume that it is susceptible to damage, hire a roof leak detection service. They use advanced technology in testing roofs for leakages and once done, roof repairs shall be promptly done to prevent extensive damage in the future.

Follow the above tips to keep your roofs in top shape. If you identify any signs of roof leakage, hire an experienced building leak detection service in the UK.

Monday 23 January 2017

What to do in case of flat roof leakage?

A flat roof is one of the most common causes for a leak. A comprehensive understanding of leakage detection UK will tell you that flat roofs are preferred choices when it comes to office buildings and most residential apartments. However, the unique structures of flat roofs make it prone to leaks. Here comes the challenging part. If you thought tracing leaks within your office was tough, think again. There are few things more challenging than tracking and fixing a leak on a flat roof. Here are some things you could do-

•    Check for source: Check for the source of the leak. If you are absolutely sure that the leak originated in the flat roof, then look for its point or origin. Follow the sound, if there's one. Look around for any stains that seem unlikely. Or you can look for dampness or foul odours. All of these indicate that the flat roof in your office or your home could be harbouring a leak somewhere.

•    Check the material:  Flat roofs being more specialised in nature usually use a different kind of material when it comes to the construction. It would help you to know what material the roof is made up of. That way, it'll be easier for you to look for the hidden leak. .

•    Eliminate other leaks: A leaky roof isn't just inconvenient, it is pretty expensive too. If you're looking at flat roof leak detection UK, you need to first eliminate the possibility for any other kind of leaks in your house.

Wednesday 11 January 2017

3 reasons why you shouldn't ignore signs of water leakage

Here's the harsh truth for you - most of us are staunch supporters of procrastination. We would rather leave things till the very last moment, when we're forced to do it, than get it over with. All that's fine, but not when it comes to water leaks. The thing about building leak detection UK is that you'll be able to see some warning signs. Unless the signs are too severe, we thing we could get away with it. After all, what's the worst that could happen? The answer - A LOT! Here are some of them:

•    Huge stains:  If you have a hidden leak behind a wall, you'll start seeing some stains soon enough. And over time, if ignored, these stains are just going to keep getting bigger and more prominent. That ruins the overall appearance of your house and also damages and weakens the wall from within.

•    Weird sounds:  If you have a leak in your bathroom, you'll be able to hear the familiar "drip, drip" sound frequently. At first, you might ignore it and even try your best to get it out of your mind. You might even get used to it. But eventually, it'll end up annoying you immensely. That is why you need to learn about leakage detection UK.

•    Foul odour: If you have a leak behind your walls or in your washroom or even under your carpet, it will start generating a bad odour pretty soon. Water that is rotting away in a closed space emits a smell that might make it impossible for you to live there. That's precisely why you need to pay attention to the signs of water leak immediately.

Wednesday 4 January 2017

2 things you must do when you discover a water leak


The trickiest part when it comes to leaks in your office or even your homes is the detection. More often than not, you're left wondering for days on end about that weird noise coming from the bathroom or why the water bills are ridiculously high. If you've taken it upon yourself to detect the leak that's bothering you, then it's good for you! If you follow the right way, you might probably even succeed with leakage detection UK. But what do you do next? What is your course of action now? If you go the wrong way, it could end up burning a hole in your pocket. This is what you should do instead:

•    Call the waterproofing guy: Now that you've actually located the leak, you've done most of the work. Now, it would be time to call the waterproofing guy or the plumber in charge of your systems. The leak detection specialists UK would know exactly how to stop the leak or if you need to replace something. For instance, if you have a leak in your basement, then you need to take certain preventive measures which can avoid further damage.

•    Try to minimise the leak: If you have actually managed to locate the leak, then you are actually past the hard part. All you have to do is stop the leak now. Have you called the plumbing guy? Well done. But what do you do in the meantime? Do you wait for it to get worse? Of course not. You try to minimise the leak as far as possible.