With respect to water leak detection, fitness centres require frequent maintenance, due to the nature of equipment’s and the frequency in the use of the wet rooms. The showers, steam area and swimming pools are used much regularly than when compared to other commercial establishments.
In the case of water leak in a gym, extra care must be exercised to get the leak fixed as room as possible to prevent any further damage to the building structure.
Here are some of the best techniques used waterproofing testing to effectively determine leaks:
Water analysis:
This technique involves testing water samples for bacterial counts. By this test it can be determined if the water is fresh or contaminated. This helps in detecting any leaks from the drainage pipes into the main line.
Electrical testing:
Otherwise known as earth leak detection, it is based on the fact that water can conduct electricity and the structural membranes such as roofs and walls don’t conduct electricity. The electrical testing can be used to even find microscopic leaks. A sensitive meter records the pulsed electric fields of the leak portion. This testing method is generally used in cases where the leak originates from a weaker section above the roofing structure.
Tit Bit: Thornton Consulting was the first UK consultancy to offer electrical testing in the UK starting in early 1987.
Differential Pressure Testing:
The test is done by drawing air through a surfactant applied over laps, and this determines if there are any leaks in the structure.
Pin-Hole testing:
Previously only used to test bridge deck membranes, but now it’s used as mostly a certification tool.
Contact Thornton Consulting for expert commercial water leak detection services in the UK. Visit http://www.thorntonconsulting.co.uk/ for more details.
In the case of water leak in a gym, extra care must be exercised to get the leak fixed as room as possible to prevent any further damage to the building structure.
Here are some of the best techniques used waterproofing testing to effectively determine leaks:
Water analysis:
This technique involves testing water samples for bacterial counts. By this test it can be determined if the water is fresh or contaminated. This helps in detecting any leaks from the drainage pipes into the main line.
Electrical testing:
Otherwise known as earth leak detection, it is based on the fact that water can conduct electricity and the structural membranes such as roofs and walls don’t conduct electricity. The electrical testing can be used to even find microscopic leaks. A sensitive meter records the pulsed electric fields of the leak portion. This testing method is generally used in cases where the leak originates from a weaker section above the roofing structure.
Tit Bit: Thornton Consulting was the first UK consultancy to offer electrical testing in the UK starting in early 1987.
Differential Pressure Testing:
The test is done by drawing air through a surfactant applied over laps, and this determines if there are any leaks in the structure.
Pin-Hole testing:
Previously only used to test bridge deck membranes, but now it’s used as mostly a certification tool.
Contact Thornton Consulting for expert commercial water leak detection services in the UK. Visit http://www.thorntonconsulting.co.uk/ for more details.
0 comments:
Post a Comment