4 Common Commercial Roof Problems that Need Immediate Attention

When was the last time your commercial roof was inspected? If it has been a while, there may be problems that need immediate attention so that your business can run smoothly. While some roofs show evident signs of leaks, other roofs have subtle problems that need leak detection specialists in UK to analyse. Either way, it is important to catch these problems on time or else its repair can cost you a fortune. If your commercial roof has any of these issues, get them checked by a specialist instantly:

1. Buckled Panels

Poor installation or bad weather conditions can cause roof panels to buckle. Due to this, the wind can blow beneath the panel and make them loose. Once this problem gets severe, the panels start coming off, especially if there is a storm.

2. Widened Screw Holes

Time, wind, or fluctuating weather temperatures can cause the screw holes to expand and leave a space between the screws that hold the panel firmly. This empty space can cause water to leak and soak the roof decks. If the deck gets saturated, the problem can be impossible to fix.

3. Blistering

Sub-standard heating procedures can cause roof systems to blister. The smaller ones may not cause too much of a problem but large blisters can rupture and allow water to seep inside. Areas with hot and humid weather conditions often suffer from blistering on commercial roofs.

4. Ponding Water

Water can get collected in small ponds on the roof due to blocked drains or a sloping problem on the roof. While it may be easy to clean blocked drains, repairing the slope can be a difficult task. During the rainy season, it is important to watch for ponding water on the roof. 

UK leak detection is the first step to ensuring a well-maintained and leak-proof roof. Trust commercial roof detection specialists to check your roof at regular intervals.

Read More

Does Your Flat Roof Suffer from These 3 Common Reasons for Leak Problems?

Flat roofs are considered highly water-resistant and long-lasting, making them a pleasing option for property owners. If the flat roof was built with a tar and gravel finish, it may have been great at repelling water. However, with time, there can be a condition causing water to sag and puddles to gather on the roof. Over time, these puddles can start penetrating the roof surface, causing leaks. In modern times, most flat roofs are constructed using a rubber-like material that is highly resilient to leaks and does not result in sagging or puddles. Some of the main reasons why leaks develop on a roof include:

1.    Poor Design – Though a flat roof by definition is laid horizontally, it is crucial to have a slight tilt so that water can flow off the surface easily. Also, if the roof does not have enough drainage outlets, there is a high possibility that pools of water will develop and cause long term damage.

2.    Poor Quality Installation – If you are going to conduct business in a property, ensuring that it is built with superior materials is a must for business to run smoothly. A poor installation can cause water leaks in just a year or two.

3.    Solar Damage – If your building is based in a location with higher quantities of sunlight in the year, there is a possibility of potential solar damage. UV lights can cause trouble in various roofing materials, reducing their ability to protect your building in the long-term. It is best to use solar reflective or UV resistant materials for the roof and opt for timely building leak detection in UK to protect from prolonged and harsh sunlight.

Timely maintenance is the key to avoid bigger roofing problems in your commercial property. By choosing UK leak detection systems on a regular basis, you can detect damage and rectify it at the earliest.

Read More

Opting for a Thorough Leak Detection Can Save Your Business a Lot of Money

High water bills may be a cause of concern for business owners as it can predict leaking pipes or excessive water usage. In order to keep operational costs down, it is crucial to check fixtures for running water and monitor usage on a timely basis. Unfortunately, leaks are unavoidable in a constructed property. Even if high quality materials are used and expert plumbers have been employed for the job, pipes can corrode and break down over time. Once a system has been installed in your business premises, it is important to opt for timely maintenance and inspection in order to keep the repair and replacement costs down for your company.

The Right Technique Makes all the Difference

When you hire a technician for your building leak detection UK, it is important that they use the best techniques for the job. Some technicians may only look from where the water is coming from, but that doesn’t mean that’s the exact location of the leak. Water could drip almost ten feet or more from the actual location of the leak. Contractors who create holes to find the leak can cause more damage to your property and higher expenses in your bills. On the contrary, using technological detection systems will provide more accuracy and will be less invasive on your property.

While Hiring a Company for Leak Detection, Make Sure To:

•    Ask which technology will be used and make sure it causes minimum damage to your building

•    Remember that a thorough analysis is the key to long-term solution from leaks

•    Demand a fair pricing so that you can easily afford their services on a regular basis

Whether you need basement leak detection in UK or roof leak detection, it is best to employ experienced companies with the latest technologies to help save money, time and your business!

Read More

The Best Ways to Detect Leaks on a Flat Roof

Business owners are often so involved in managing daily operations that they tend to ignore one of the most important aspects of running their business – a safe and secure building. In many cases, there is an unknown leak growing rapidly in a commercial building, without the knowledge of the building or business owners. If this continues to grow, it can disrupt the entire functioning of the business, thus causing major downtime. In order to avoid these drastic situations, it is best to look for flat roof detection in UK on time.

Identify the Source

While checking flat roofs, it is important to ensure that the surface is cool and dry. It can be quite difficult to determine a leak in a wet surface. The flashing or the joining of roof parts is highly susceptible for leaks. It is important to check the gaps and loose joints where the wear and tear may have occurred. Ideally, the flashing should be integrated in a way that rainwater moves away from it to avoid water damage on flat roofs.

Low-Lying Areas

Many times, the flashing appears normal without any gap or cracks visible. If this is the case, it is important to check the lower roof areas as these regions tend to accumulate lots of water and can easily develop corrosion or cracks. These are like dirt rings where each ring diminishes in size as it goes further below.  It is important to inspect these areas meticulously to avoid big problems.

Roof Seams
Another place where flat roofs can develop cracks are the seam areas of the roof. As the roof gets older, there are higher chances of leakage in the seams. Even if you seal these seams, there are still chances of the leakage still existing.

It is important to hire a trusted leakage detection company in UK to help you analyse your flat roofs at the earliest.

Read More

The 5 Benefits of Using Infrared Thermography for Leak Detection on Your Roof

UK leak detection is extremely important in office spaces when any form of leak occurs around the building. The amount of loss caused to the business cannot be determined based on the quantity of the leak as sometimes, a small hidden leak can be much more dangerous than a huge visible one. Different companies employ different leak detection methods but one of the most impressive and innovative method is infrared thermography. Some of the main benefits of using this technology for leak detections include:

1.    Accuracy – This method assures 100% accuracy in determining leaks as it uses the latest technology. Thermal imaging camera systems are used to detect fault lines and analyse radiated energy.

2.    Cost-Effective – Compared to the conventional methods of leak detection, infrared thermography is more cost-effective. Plus, since the results are scientifically proven, you don’t need to spend extra money on the whole process.

3.    Safe & Fast – Keeping your office premises safe is a major concern for most business owners. With this technique, you can be assured of a safe detection. Leak detection specialists in UK often call it the safest method available. Plus, this technique works faster than any other, saving you lot of time.

4.    Non-Invasive for Properties – This method is not like the dig and drill technique, thus protecting your premises from any damage. It mainly involves scanning the building without digging the floors or breaking the walls.

5.    Easy Survey of the Building–If you hire a company with highly trained thermographers, they will be able to easy scan the entire building and access the area accurately for any possible leaks.

This comprehensive technology offers great benefits for business owners as they don’t need to shut down their office or relocate while conducting thorough leak detection at their premises.

Read More

Detecting Life Span of Commercial Metal Roofs

Life span of commercial buildings depends upon the quality of material used, weather conditions and accuracy of installation of roof. A properly installed roof lasts for decades. You can know when a commercial building needs a new roof at the sight of following factors:

Leak Spots

A leaky roof indicates necessity of a new roof. UK leak detection can help you detect and differentiate plumbing leak and roof leak. For early signs you must check the time when they occur. If the leak widens on a wet day then it is probably a roof leak. People assume a plumbing emergency whenever they spot a leak. A roof leak requires immediate repair or replacement based on the condition of leak.

Deteriorated Joints

Panels are held together with joints. Due to harsh weather conditions or continuous exposure to rain or wind, these joints erode. It is critical to consider replacing the roof when corrosion, pitting or rusting can be seen along roof joints. An early detection of these signs can save installation of new roof with small repairs. Experts from UK leak detection report the condition of roof and advice possible repairs.

Missing and Buckled Panels

Missing panels are a roof emergency which needs immediate replacement. Buckling panels are a result of improper installation or high temperatures. They tend to blow with the wind and leak with rain. Missing and buckled panels pose a threat to the building.

Read More

How to Minimise Cost and Optimise Commercial Roof Repairs?

Businesses address roof repairing and replacements differently than households. Maintenance of commercial building is an expense which affects company’s budget. Therefore, a decision regarding roofs must be financially justified. A business can make necessary repairs and justify replacements monetarily by contacting building leak detection experts in UK. 

1.    Discovering Problem Areas

A proper inspection of the roof is necessary for estimating roof repair needs. A comprehensive inspection will report signs of leaks, deterioration, shingles, cracks and others. Inspection covers roofs, attic and any other areas prone to leaks. A consolidated report of problem areas cover the damage done to the roof and the actions required.

2.    Repair or Replacement

Building leak detection in UK analyse roof and estimate plan of action. An experienced and educated roof inspection company advices whether the roof needs replacement or repair. They also estimate the repairs needed and guide you to the best roof repair contractor.

3.    Choosing a Roof Repair or Replacement Contractor

A leak detection consultant will provide you with details of contractors. These contractors are chosen after considering your commercial roof repairs. You must choose the contractor based on:
•    Experience of working with commercial buildings
•    Accessibility and ease of contractor
•    Review from previous customers

You must inspect roof leaks, report necessary repairs and choose the right contractor for your commercial roof repair.

Read More