Signs That Show You Have a Possible Leakage in Your Building

In England and Wales 3 billion litres of water gets wasted per day. The fault in the water distribution network may contribute to some of this lose. But a significant portion of leaked water is from within the consumer properties. Just because a leak is not noticeable doesn’t mean you don’t have one. Get help from a specialist known for building leak detection in UK to check for a leak. Few indications that points to water leakage are listed below,

•    Check the winter water usage in your building. If the water usage exceeds the required amount, hire a leak detection specialist in UK immediately.

•    Inspect your water meter before and after a specific period when no water is used. You have a leak if the reading changes in the meter.

•    Find if you have a toilet leak by dropping food colouring in the toilet tank. If the bowl shows the colour without flushing within 10 minutes then you have leak.  Flush the toilet immediately after this experiment to avoid staining the tank.

•    If there is any sign of low water pressure, there could be a leak in the roof or the toilet

•    A loud noise in a hot water system is not a good thing. It is a warning sign that it is about to burst or leak.

•    If you find a mysterious patch of grass really growing quick in your place, there is a possibility of an underground leak somewhere around the area.

Do not ignore any of the above signs and locate the source of the leak by hiring a professional in leak detection before going for a repair.

Read More

Guidelines That Can Help You To Appoint A Perfect Leak Detection Specialist In UK

Water leaks can seriously affect your property. If you reckon any presence of leakage in the building of your industry or any commercial area, it is advised to confirm your suspicions about the damage before hiring servicemen to repair it. Locating the true source of the leak is not easy and can really be frustrating. Fault detections may hurt you financially in either way. A leak detection specialist can help you out of this situation.

Getting the help of the right leak detection specialist in UK is very important. They also have to be trust worthy, reliable and should have the right qualifications. Look for the following features before hiring,

•    The company that you go for must regard client and staff safety as their top priority. Hire a leak detection specialist in UK who holds a valid insurance coverage. This will protect you from any unfortunate event in which one of own employees or the consultant’s gets injured during the work

•    A licensed and qualified professional who has been approved by your local authority is always the right choice for you. Because,

o    They would have completed the training that makes them qualified specifically for the task in hand. For instance there are only few professionals who are qualified for Flat roof leak detection  in UK

o    They would be properly equipped with the required tools to deliver the service

•    Make sure that they have expertise in handling advanced technologies as it can make the process more targeted, involving less time and you can return to your normal functions quickly

You can rest in easy after the appointment of a specialist and wait for their validation of the situation. Then you can decide if you need a leakage repair or not.

Read More

Importance of Water leak detection

Statistics provided by the environmental protection agency and studies performed by the insurance industry indicate that water damage is a very costly threat. The Association of British Insurers (ABI) reported that the cost to the insurance industry from water problems was a colossal £730 million in 2010 and major contributor to this problem is water leak. Therefore leak detection in UK is not just an optional system anymore for building owners and Industrialist

Major sources of Water leakage

•    Leak of refrigerants in refrigerators or air conditioning systems both large and small

•    Pipes across the ceiling also contribute to water leaks

•    Other sources include tenants living above your floor, wall next to the bathroom and water tank room

Common effects of Water leakage

•    If there are leaks under raised floor it may result in Power failure, equipment failure, and the leaked water can also affect the people living under your floor

•    Computer equipment failure, UPS and air conditioner failure may occur due to the leaks in the ceiling

As a result you may have to replace electronic equipment, power and insulation wires under raised floor. Losses are more in industries where important computer files can get corrupted and may even lead to downtime. To protect their mission critical equipment and to ensure greater uptime in UK, leak detection techniques are preferred by businessmen.

Given the large amount of water-based claims, these water leak detection systems can also help insurance companies lower their risk and exposure to business interruptions and outages caused by water damage.

Read More

The Importance of Commercial Building Roof Maintenance to Business Owners

Every building needs timely maintenance to stay in top conditions, and roofs are no exception. If appropriate care is not provided to a roof covering, the primary damage can be a leak and it can eventually cause a lot of damage to the entire building. In order to avoid expensive repair costs, preventive maintenance is the best way to keep commercial roofs in best conditions. One of the biggest reasons of structural complications is often water-related and thus, every commercial building owner must conduct building leak detection in UK every year.

Inspection that acts as Prevention

If a roof leak is not detected and repaired in time, it can cause wreck and havoc in the building and the dripping water can ruin the walls, ceilings and several other areas of a building, thus causing major problems to businesses operating there. If mildew or mold is growing on the roof and it tends to spread around the building, it can also cause health complications. If a roof leak remains unrepaired for a long time, it can make the building unsafe for business due to the weak structure. The best ways to avoid all these problems is to get expert inspectors who will check the following on your building roofs:

•    Gutters
•    Points of penetration for water
•    Ponding water or debris
•    Flashing
•    Shingles
•    Ventilation components around the roof

Roof leaks often begin with shingle complications or a point of penetration like chimneys, vents, pipes and additional components on the roof. Penetration points must be water-sealed every 2-5 years as a preventive measure to avoid leaks and damage. It is also important to look for neglected gutters or downspouts as they cause water to overflow on the roof.

A thorough inspection for UK leak detection on the roof and internal areas of the building can avoid major roofing problems in the future.

Read More

The Importance of Understanding and Identifying Roof Leaks at the Right Time

Timely roof inspections are highly important for leakage detection in UK in major business hubs. Any problem with the roofing of a building can cause a business to experience downtime and lead to major losses. The main factors to consider while diagnosing leaking roofs include:

1.    Condition of the Covering – The roof covering can get damaged and show signs of broken tiles or slates, corroded or damaged roof sheets or thatch weathered due to destruction. If the roof isn’t installed properly, it can lead to making the roof covering ineffective.

2.    Roof Pitches – In most cases, only flat roofs are water-proofed while the others are weather-proofed. The roofs are usually designed so that water sheds quickly and doesn’t penetrate in the covering. Normally, a steeper roof pitch has lesser chances of a leak.

3.    Weak Points – Areas where the roof intersects with chimneys, walls, or other roofs, are more prone to flashing.

Things Experts Check While Conducting Building Leak Detection UK:

Tiles & Slates – Roof inspectors check for broken or cracked tiles and slates on the roof. If the tiles aren’t installed properly, there are high chances of vulnerability along the ridges.

Roof Sheeting – If there is metal roof sheeting, there are high chances of corrosion along the overlaps and screws. Cracked sheeting or weathered fibre cement can be a problem to the roof and the building.

Semi-Flat Roofs – If waterproofing hasn’t been done properly or it is too old, there are high chances of a leak on such roofs. An adequate and unblocked drainage system is a must in such roofs.

Leaks can occur due a number of reasons on and around the roof. By identifying them on a timely basis, commercial properties can save their building from damage and also save on major repair costs.

Read More

How Can Infrared Moisture Survey Detect & Help Solve Moisture Levels on Commercial Roofs?

Since roofs are the most exposed parts of a commercial building, they are highly prone to damage due to the changing weather conditions all through the year. If there is any kind of excess moisture on the roof, it can hamper the roof’s overall durability and pose serious threats to building owners and employees. Flat roof leak detection in UK is one of the best ways to avoid problems from growing on the roof and catching them at the earliest. An infrared roof moisture survey is one of the leading methods to determine the moisture problems present on a commercial roof.

The Technological Process
 

When the sun is out, the entire roof usually heats up and the cooling process only begins when the sun starts going down. At this time, the roof emits a considerable amount of heat back into the atmosphere, also known as radiation cooling. However, not all parts of the roof emit consist heat into the atmosphere. Areas that are wet with higher masses can often retain more heat compared to areas with lower masses that tend to dry quicker.

When leak detection experts use infrared imaging to capture pictures of specific areas on the roof, the smart devices can detect the areas with higher masses which are wet and warmer than the dry ones. Infrared technology can easily determine the areas which are retaining moisture on a roof and thus, save owners lot of trouble and money in the future.

The Ideal Time to Use Infrared Technology:

•    Should be used before the roof warranty expires
•    Before buying new commercial property
•    Before you set up new annual budgets for roof repairs
•    Before re-roofing on an existing assembly
•    When you notice any moisture or roof leaks

Whether you’re struggling with a roof leak or want basement leak detection in UK, using the latest technologies can help you catch the leak as early as possible and find ways to resolve the problem without spending too much on replacements.

Read More

4 Common Commercial Roof Problems that Need Immediate Attention

When was the last time your commercial roof was inspected? If it has been a while, there may be problems that need immediate attention so that your business can run smoothly. While some roofs show evident signs of leaks, other roofs have subtle problems that need leak detection specialists in UK to analyse. Either way, it is important to catch these problems on time or else its repair can cost you a fortune. If your commercial roof has any of these issues, get them checked by a specialist instantly:

1. Buckled Panels

Poor installation or bad weather conditions can cause roof panels to buckle. Due to this, the wind can blow beneath the panel and make them loose. Once this problem gets severe, the panels start coming off, especially if there is a storm.

2. Widened Screw Holes

Time, wind, or fluctuating weather temperatures can cause the screw holes to expand and leave a space between the screws that hold the panel firmly. This empty space can cause water to leak and soak the roof decks. If the deck gets saturated, the problem can be impossible to fix.

3. Blistering

Sub-standard heating procedures can cause roof systems to blister. The smaller ones may not cause too much of a problem but large blisters can rupture and allow water to seep inside. Areas with hot and humid weather conditions often suffer from blistering on commercial roofs.

4. Ponding Water

Water can get collected in small ponds on the roof due to blocked drains or a sloping problem on the roof. While it may be easy to clean blocked drains, repairing the slope can be a difficult task. During the rainy season, it is important to watch for ponding water on the roof. 

UK leak detection is the first step to ensuring a well-maintained and leak-proof roof. Trust commercial roof detection specialists to check your roof at regular intervals.

Read More