Importance of Water leak detection

Statistics provided by the environmental protection agency and studies performed by the insurance industry indicate that water damage is a very costly threat. The Association of British Insurers (ABI) reported that the cost to the insurance industry from water problems was a colossal £730 million in 2010 and major contributor to this problem is water leak. Therefore leak detection in UK is not just an optional system anymore for building owners and Industrialist

Major sources of Water leakage

•    Leak of refrigerants in refrigerators or air conditioning systems both large and small

•    Pipes across the ceiling also contribute to water leaks

•    Other sources include tenants living above your floor, wall next to the bathroom and water tank room

Common effects of Water leakage

•    If there are leaks under raised floor it may result in Power failure, equipment failure, and the leaked water can also affect the people living under your floor

•    Computer equipment failure, UPS and air conditioner failure may occur due to the leaks in the ceiling

As a result you may have to replace electronic equipment, power and insulation wires under raised floor. Losses are more in industries where important computer files can get corrupted and may even lead to downtime. To protect their mission critical equipment and to ensure greater uptime in UK, leak detection techniques are preferred by businessmen.

Given the large amount of water-based claims, these water leak detection systems can also help insurance companies lower their risk and exposure to business interruptions and outages caused by water damage.

Read More

The Importance of Commercial Building Roof Maintenance to Business Owners

Every building needs timely maintenance to stay in top conditions, and roofs are no exception. If appropriate care is not provided to a roof covering, the primary damage can be a leak and it can eventually cause a lot of damage to the entire building. In order to avoid expensive repair costs, preventive maintenance is the best way to keep commercial roofs in best conditions. One of the biggest reasons of structural complications is often water-related and thus, every commercial building owner must conduct building leak detection in UK every year.

Inspection that acts as Prevention

If a roof leak is not detected and repaired in time, it can cause wreck and havoc in the building and the dripping water can ruin the walls, ceilings and several other areas of a building, thus causing major problems to businesses operating there. If mildew or mold is growing on the roof and it tends to spread around the building, it can also cause health complications. If a roof leak remains unrepaired for a long time, it can make the building unsafe for business due to the weak structure. The best ways to avoid all these problems is to get expert inspectors who will check the following on your building roofs:

•    Gutters
•    Points of penetration for water
•    Ponding water or debris
•    Flashing
•    Shingles
•    Ventilation components around the roof

Roof leaks often begin with shingle complications or a point of penetration like chimneys, vents, pipes and additional components on the roof. Penetration points must be water-sealed every 2-5 years as a preventive measure to avoid leaks and damage. It is also important to look for neglected gutters or downspouts as they cause water to overflow on the roof.

A thorough inspection for UK leak detection on the roof and internal areas of the building can avoid major roofing problems in the future.

Read More

The Importance of Understanding and Identifying Roof Leaks at the Right Time

Timely roof inspections are highly important for leakage detection in UK in major business hubs. Any problem with the roofing of a building can cause a business to experience downtime and lead to major losses. The main factors to consider while diagnosing leaking roofs include:

1.    Condition of the Covering – The roof covering can get damaged and show signs of broken tiles or slates, corroded or damaged roof sheets or thatch weathered due to destruction. If the roof isn’t installed properly, it can lead to making the roof covering ineffective.

2.    Roof Pitches – In most cases, only flat roofs are water-proofed while the others are weather-proofed. The roofs are usually designed so that water sheds quickly and doesn’t penetrate in the covering. Normally, a steeper roof pitch has lesser chances of a leak.

3.    Weak Points – Areas where the roof intersects with chimneys, walls, or other roofs, are more prone to flashing.

Things Experts Check While Conducting Building Leak Detection UK:

Tiles & Slates – Roof inspectors check for broken or cracked tiles and slates on the roof. If the tiles aren’t installed properly, there are high chances of vulnerability along the ridges.

Roof Sheeting – If there is metal roof sheeting, there are high chances of corrosion along the overlaps and screws. Cracked sheeting or weathered fibre cement can be a problem to the roof and the building.

Semi-Flat Roofs – If waterproofing hasn’t been done properly or it is too old, there are high chances of a leak on such roofs. An adequate and unblocked drainage system is a must in such roofs.

Leaks can occur due a number of reasons on and around the roof. By identifying them on a timely basis, commercial properties can save their building from damage and also save on major repair costs.

Read More

How Can Infrared Moisture Survey Detect & Help Solve Moisture Levels on Commercial Roofs?

Since roofs are the most exposed parts of a commercial building, they are highly prone to damage due to the changing weather conditions all through the year. If there is any kind of excess moisture on the roof, it can hamper the roof’s overall durability and pose serious threats to building owners and employees. Flat roof leak detection in UK is one of the best ways to avoid problems from growing on the roof and catching them at the earliest. An infrared roof moisture survey is one of the leading methods to determine the moisture problems present on a commercial roof.

The Technological Process
 

When the sun is out, the entire roof usually heats up and the cooling process only begins when the sun starts going down. At this time, the roof emits a considerable amount of heat back into the atmosphere, also known as radiation cooling. However, not all parts of the roof emit consist heat into the atmosphere. Areas that are wet with higher masses can often retain more heat compared to areas with lower masses that tend to dry quicker.

When leak detection experts use infrared imaging to capture pictures of specific areas on the roof, the smart devices can detect the areas with higher masses which are wet and warmer than the dry ones. Infrared technology can easily determine the areas which are retaining moisture on a roof and thus, save owners lot of trouble and money in the future.

The Ideal Time to Use Infrared Technology:

•    Should be used before the roof warranty expires
•    Before buying new commercial property
•    Before you set up new annual budgets for roof repairs
•    Before re-roofing on an existing assembly
•    When you notice any moisture or roof leaks

Whether you’re struggling with a roof leak or want basement leak detection in UK, using the latest technologies can help you catch the leak as early as possible and find ways to resolve the problem without spending too much on replacements.

Read More

4 Common Commercial Roof Problems that Need Immediate Attention

When was the last time your commercial roof was inspected? If it has been a while, there may be problems that need immediate attention so that your business can run smoothly. While some roofs show evident signs of leaks, other roofs have subtle problems that need leak detection specialists in UK to analyse. Either way, it is important to catch these problems on time or else its repair can cost you a fortune. If your commercial roof has any of these issues, get them checked by a specialist instantly:

1. Buckled Panels

Poor installation or bad weather conditions can cause roof panels to buckle. Due to this, the wind can blow beneath the panel and make them loose. Once this problem gets severe, the panels start coming off, especially if there is a storm.

2. Widened Screw Holes

Time, wind, or fluctuating weather temperatures can cause the screw holes to expand and leave a space between the screws that hold the panel firmly. This empty space can cause water to leak and soak the roof decks. If the deck gets saturated, the problem can be impossible to fix.

3. Blistering

Sub-standard heating procedures can cause roof systems to blister. The smaller ones may not cause too much of a problem but large blisters can rupture and allow water to seep inside. Areas with hot and humid weather conditions often suffer from blistering on commercial roofs.

4. Ponding Water

Water can get collected in small ponds on the roof due to blocked drains or a sloping problem on the roof. While it may be easy to clean blocked drains, repairing the slope can be a difficult task. During the rainy season, it is important to watch for ponding water on the roof. 

UK leak detection is the first step to ensuring a well-maintained and leak-proof roof. Trust commercial roof detection specialists to check your roof at regular intervals.

Read More

Does Your Flat Roof Suffer from These 3 Common Reasons for Leak Problems?

Flat roofs are considered highly water-resistant and long-lasting, making them a pleasing option for property owners. If the flat roof was built with a tar and gravel finish, it may have been great at repelling water. However, with time, there can be a condition causing water to sag and puddles to gather on the roof. Over time, these puddles can start penetrating the roof surface, causing leaks. In modern times, most flat roofs are constructed using a rubber-like material that is highly resilient to leaks and does not result in sagging or puddles. Some of the main reasons why leaks develop on a roof include:

1.    Poor Design – Though a flat roof by definition is laid horizontally, it is crucial to have a slight tilt so that water can flow off the surface easily. Also, if the roof does not have enough drainage outlets, there is a high possibility that pools of water will develop and cause long term damage.

2.    Poor Quality Installation – If you are going to conduct business in a property, ensuring that it is built with superior materials is a must for business to run smoothly. A poor installation can cause water leaks in just a year or two.

3.    Solar Damage – If your building is based in a location with higher quantities of sunlight in the year, there is a possibility of potential solar damage. UV lights can cause trouble in various roofing materials, reducing their ability to protect your building in the long-term. It is best to use solar reflective or UV resistant materials for the roof and opt for timely building leak detection in UK to protect from prolonged and harsh sunlight.

Timely maintenance is the key to avoid bigger roofing problems in your commercial property. By choosing UK leak detection systems on a regular basis, you can detect damage and rectify it at the earliest.

Read More

Opting for a Thorough Leak Detection Can Save Your Business a Lot of Money

High water bills may be a cause of concern for business owners as it can predict leaking pipes or excessive water usage. In order to keep operational costs down, it is crucial to check fixtures for running water and monitor usage on a timely basis. Unfortunately, leaks are unavoidable in a constructed property. Even if high quality materials are used and expert plumbers have been employed for the job, pipes can corrode and break down over time. Once a system has been installed in your business premises, it is important to opt for timely maintenance and inspection in order to keep the repair and replacement costs down for your company.

The Right Technique Makes all the Difference

When you hire a technician for your building leak detection UK, it is important that they use the best techniques for the job. Some technicians may only look from where the water is coming from, but that doesn’t mean that’s the exact location of the leak. Water could drip almost ten feet or more from the actual location of the leak. Contractors who create holes to find the leak can cause more damage to your property and higher expenses in your bills. On the contrary, using technological detection systems will provide more accuracy and will be less invasive on your property.

While Hiring a Company for Leak Detection, Make Sure To:

•    Ask which technology will be used and make sure it causes minimum damage to your building

•    Remember that a thorough analysis is the key to long-term solution from leaks

•    Demand a fair pricing so that you can easily afford their services on a regular basis

Whether you need basement leak detection in UK or roof leak detection, it is best to employ experienced companies with the latest technologies to help save money, time and your business!

Read More